Thermal Hero Knowledge Center And Häufige Fragen
Deep product guidance for customers choosing between paste, pads, PCM, Flüssigmetall, graphene and bundle products.
Empfohlene Produkte
Start with the product route that matches your hardware, contact area and installation risk.
QUANTUM
Direct-contact paste route for CPU, GPU and high-load systems.
GAMMA
Phasenwechsel interface for stable heat-cycle behavior.
NEO PAD 1,0 mm – Standard-Übertaktungsspeicher
Gap-filling path for VRAM, SSD, memory and power areas.
METALLIQ
Liquid-metal path for compatible surfaces and experienced users.
Use Guides To Reduce Wrong Purchases
The best support page does not only answer questions. It pushes the customer into the correct product category or safety page.
The Main Decisions
Customers usually need help with three decisions: direct contact or gap, safe route or expert route, single product or complete bundle.
Too Much Menu Creates Confusion
The header should stay clean. Detail pages should be reached from the guide content and CTAs.
Best Nächster Schritt
Produktfinder verwenden for decision support, Compatibility And Sicherheit for risk checks, and product pages for final purchase.
Material Decision Matrix
Selection Guidance
A correct thermal choice starts with the contact type: direct chip contact, component gap, Phasenwechsel service, graphene heat spreading or liquid-metal expert use.
Choose the product family that matches the hardware area, contact pressure, gap height and risk level of the application.
Use the Produktfinder when the application is unclear, or open the product cards when the material route is already known.
Recommended When
The hardware area and material type are known and the customer wants a direct buying path.
Check First When
The surface material, pad thickness, gap height or electrical risk is unclear.
Avoid When
The customer wants one material for all areas. A correct thermal refresh often uses several product families.
Installation And Buying Workflow
Only one compact workflow remains on the page. The main content above now carries the topic detail.
Inspect
Identify direct contact, gap material, airflow and electrical risk before buying.
Select
Choose paste, PCM, pad, Flüssigmetall or graphene by the real contact requirement.
Install
Saubere Oberfläches, control thickness or amount, and keep conductive materials isolated.
Verify
Test under load and check temperature, hotspot, noise and stability.
Continue With The Correct Next Page
Use CTAs inside the page instead of overloading the header with too many similar entries.
Fragen vor dem Kauf
Short answers for the decision points that matter on this topic.
Which product should I choose first?
Start with the contact type. Direkter Chipkontakt usually needs paste or PCM. Komponentenspalts need thermal pads. Liquid metal and graphene are advanced options.
Why are there several product families?
Different cooling areas need different materials. One material cannot safely solve every CPU, GPU, VRAM, SSD and console problem.
When should I use the Produktfinder?
Use the Produktfinder when you are not sure about surface compatibility, gap thickness or whether the system needs paste, pads, PCM, Flüssigmetall or graphene.