SSD Cooling Products For M.2 Drives And Heatsinks
SSD cooling is normally a pad-fit problem. The controller and NAND packages need contact without bending the drive.
Fitting SSD Cooling Products
Choose the pad thickness that matches the original heatsink gap and compression target.
NEO PAD 0.5 mm – Low-Gap Precision
Low-gap pad for thin M.2 heatsink contact.
NEO PAD 1.0 mm – Standard Overclocking Memory
Standard pad route for SSD and storage heatsinks.
NEO PAD 1.5 mm – High-Load Memory Cooling
Thicker pad route for larger heatsink gaps.
NEO PAD 2.0 mm – Extended Tolerance Applications
Extended thickness option for higher tolerance gaps.
NEO PAD 2.5 mm – Large Gap Compensation
Large-gap pad option where the original heatsink spacing requires 2.5 mm.
NEO PAD 3.0 mm – Maximum Gap Bridging
Maximum-gap option for special 3.0 mm component spacing.
How To Choose For This Application
Use the application logic before adding products to the basket.
The controller usually runs hottest and needs reliable pad contact.
Too thick can bend the drive. Too thin can leave an air gap.
After fitting, contact marks help confirm compression.